Art and Design

Steampunk Texture Painting: Faux Metal and Patina Techniques

How to paint steampunk texture: a dark base, faux brass and copper, drybrushing, verdigris and rust, texture media, sealing, and safety tips for each step.

On this page
  1. Where the look comes from
  2. Actual and simulated texture
  3. Materials for building texture
  4. Start with a dark base
  5. Layer faux brass, copper and bronze
  6. Drybrushing and grime washes
  7. Verdigris and rust
  8. Reactive “real metal” paints
  9. Sealing the finish
  10. Common mistakes
  11. Safety

Steampunk texture painting imitates aged metal on almost any surface, from a canvas to a wooden box. The metals include brass, copper and iron, along with rust and verdigris. The work uses paint and texture materials, and it is built in layers: a dark base, metallic colors, shading, then texture and weathering.

Where the look comes from

Steampunk draws mainly on Victorian Britain and the Industrial Revolution, as imagined in fiction. Other traditions have since shaped the genre. Silkpunk draws on East Asian-inspired technology, and steamfunk draws on African and African-diaspora settings. Each brings its own imagery. See what are the different subgenres of steampunk? for more.

Actual and simulated texture

A common split is between two kinds of texture:

  • Actual texture is physical. You can feel it, as with thick paste or raised rivets.
  • Simulated texture is painted to look rough or raised, though the surface is flat.

Steampunk texture painting relies mostly on simulated texture, with some actual texture built up for depth. There is no single standard list of texture types, so this split is a practical guide.

Materials for building texture

  • Modeling or texture paste for raised ridges and rough patches.
  • Gel medium, which can be mixed into paint for body and texture.
  • Embossing powder for fine raised detail.
  • Hot glue lines for quick, dimensional edges.
  • Puff paint for soft, raised shapes.
  • Faux rivets made from half-pearls, brads, or dots of dimensional paint or hot glue in evenly spaced rows.
  • Rub ’n Buff or gilder’s paste for fingertip highlights, buffed to a sheen.

Start with a dark base

Begin with black gesso or a black primer. A dark base makes metallic paint look deeper.

Layer faux brass, copper and bronze

Work in three layers:

  1. The dark base.
  2. A mid-tone metallic color.
  3. A light highlight, such as silver or pale gold, on raised edges.

Metallic paint alone will not read as metal. Contrast and shading do most of the work.

Drybrushing and grime washes

  • Drybrushing: load a brush, wipe it almost dry on paper towel, then flick it lightly across raised texture so only the peaks catch paint.
  • Grime wash: thin burnt umber or black acrylic with water or glaze medium, then wipe it back from the high points so it stays in the recesses. The right ratio varies, so test on a scrap first.

Verdigris and rust

  • Verdigris is a teal or turquoise with pale green, stippled into recesses where real patina collects. It does not cover flat surfaces evenly, so keep it in the crevices.
  • Rust uses burnt sienna, orange and dark brown. Sponge it on, then streak it downward to follow gravity.

Rust forms on iron and steel, not on brass or copper. Match the weathering to the metal you are imitating.

Reactive “real metal” paints

Some paints contain iron, copper or bronze particles, and react with an activator to form rust or patina. Apply the activator while the final coat is still tacky. Timings and activators vary by brand, so check the label.

Sealing the finish

Use a matte varnish for aged metal. Save gloss for polished brass areas, since gloss on weathered areas looks out of place.

Common mistakes

  • Relying on metallic paint alone. Contrast and shading are what sell the metal.
  • Expecting verdigris to cover flat surfaces evenly.
  • Adding too many gears. Vary the scale and leave some areas plain.

Safety

  • Ventilate when using solvent-based pastes, sprays and patina activators.
  • Wear gloves when handling patina and rust activators.
  • Hot glue guns cause burns. Use a low-temperature glue gun for detail work.

For the metals these finishes imitate, see how steampunk influences sculpture, which covers real patinas. For palette choices, see the steampunk color palette guide.

The complete guide to art and design

Steampunk Art: History, Key Facts and Famous Works
Read the guide

Keep exploring

Guides from other topics

All topics →