Costumes and Cosplay

Steampunk Costume Tutorial: Build a Cosplay Step by Step

Build a steampunk cosplay step by step: pick a persona, gather a Victorian base outfit, add accessories and props, then age and test your costume.

On this page
  1. What steampunk fashion is based on
  2. Step 1: Choose a persona
  3. Step 2: Gather references
  4. Step 3: Build the base outfit
  5. Step 4: Footwear and palette
  6. Step 5: Add accessories
  7. Step 6: Build the props
  8. Step 7: Paint, weather and age
  9. Step 8: Do a full test wear
  10. What to wear to a steampunk party
  11. Going 1920s? Dieselpunk vs. steampunk
  12. Why do steampunks wear goggles?
  13. Safety and convention rules
  14. Where to go next

What steampunk fashion is based on

Steampunk fashion is based on Victorian clothing, roughly 1837 to 1901, with some Edwardian influence from 1901 to 1910. On top of that base, it adds imagined machinery: gears, gauges, brass, copper, and leather. The base outfit makes a costume read as period-inspired. The gears and gauges are the invention.

The word “steampunk” comes from K. W. Jeter, who used it in a 1987 letter to Locus magazine.

If you are going for a 1920s look, see the section on 1920s parties below.

Step 1: Choose a persona

Pick a character before you buy anything. Common personas include the aviator, inventor, mad scientist, explorer, airship pirate, socialite, and mechanic. The persona shapes the palette, the props, and how much gear you add. An aviator might carry goggles and an aviator cap. A socialite might carry a parasol and lace gloves.

Step 2: Gather references

Save photos of Victorian clothing and of steampunk costumes you like. Look at how the pieces are cut and fastened, not only at the colors. Keep a few references for each part you plan to build, such as the coat, the skirt, the hat, and the props.

Step 3: Build the base outfit

Men’s base: a band-collar or wing-collar shirt, a waistcoat, trousers or breeches, a frock coat or tailcoat, and a cravat or ascot.

Women’s base: a high-neck blouse, an underbust corset or waist cincher, then a bustle, tiered, or high-low skirt, or trousers.

Bustle skirts belong roughly to 1869 to 1889. If you want to sew one, read how to sew a bustle skirt. For a simpler option, a tiered skirt without a pattern uses rectangles only.

About corsets

Victorian corsets were underwear. Wearing one over your clothes is a modern steampunk convention. A beginner corset usually reduces the waist by 2 to 4 inches (5 to 10 cm), and needs vary. Corsets are not a beginner project, so many first-time builders start with a skirt, a vest, or a waist cincher. Don’t lace a corset so tightly that it restricts your breathing. Loosen it if you feel dizzy.

Thrift first

Blazers, vests, long skirts, leather belts, boots, and old watches and clocks are common thrift finds. Thrifted and modified clothing is standard practice in steampunk, so a costume does not have to be expensive.

Step 4: Footwear and palette

Lace-up or buckle boots, oxfords, and spats suit the look. A common palette is brown, black, cream, burgundy, olive, and deep green, with metals in brass, copper, bronze, or gunmetal. Color accents are common, so not everything has to be brown.

Step 5: Add accessories

The core accessories are goggles, a top hat or bowler, a pocket watch on a chain, gloves, a belt with pouches, and a cane or parasol. Each has its own build guide:

For a fuller list of what counts as a steampunk accessory, see what steampunk accessories are.

Step 6: Build the props

Common prop materials are EVA foam (2 mm for details, 5 to 6 mm for armor, 10 mm for bulk), craft foam, Worbla, and PVC pipe. Worbla is a thermoplastic that becomes workable at about 90°C (194°F).

Foam props usually follow the same finish process:

  1. Heat-seal the foam with a heat gun.
  2. Prime with 3 to 4 coats of Plasti Dip or a similar primer.
  3. Paint.

For foam seams, use contact cement such as Barge or DAP Weldwood. Coat both surfaces, wait until they are dry to the touch (about 5 to 15 minutes), then press them together. Treat that bond as permanent.

Hot glue is fine for small decorative parts, but it won’t hold flexing seams.

Gears should look like they have a job. Gears glued on at random do not make a costume.

Step 7: Paint, weather and age

For metal parts, Rub ’n Buff (for example, Gold Leaf, Antique Gold, or Spanish Copper) and metallic acrylics are common choices. Add a black wash, then dry-brush to age it. The distressing guide covers fabric, leather, and metal wear in more detail.

Step 8: Do a full test wear

Wear the complete outfit before the event. Walk, sit, climb stairs, and check that you can see and reach what you need. Pieces that look right on a hanger can sag, rub, or block your view once you wear them.

What to wear to a steampunk party

Start with the base outfit, then choose two or three focal pieces, such as goggles, a pocket watch, or a hat. Too many accessories compete with each other. Keep the materials and colors consistent across the outfit.

Going 1920s? Dieselpunk vs. steampunk

Steampunk is based on the Victorian era. Styling from the 1920s to 1940s, such as art deco, diesel engines, pinstripes, and flapper dresses, is usually called dieselpunk. A “1920s steampunk costume” is therefore a mix of two eras.

For a 1920s party, a flapper dress or pinstripe suit fits the theme best. You can add steampunk details, such as goggles or a pocket watch, for a steampunk-leaning look. If the party is strictly 1920s, follow its dress code and treat the steampunk parts as optional.

Why do steampunks wear goggles?

Many steampunk goggle styles come from real working eyewear, such as early welding goggles, aviator goggles, and motoring goggles. In steampunk fashion, goggles are often worn on a hat brim or the forehead rather than over the eyes. For the names behind the styles, see what steampunk goggles are called.

Safety and convention rules

  • Use contact cement, spray paint, and Plasti Dip outdoors or with a respirator rated for organic vapors.
  • Heat guns and hot glue cause burns. Work on a heat-proof surface.
  • Costume goggles are not safety eyewear. Only lenses marked ANSI Z87.1 (US) or EN 166 (EU) are rated.
  • Convention rules for props and weapons vary by event. Check the policy before you build.

Where to go next

Keep exploring

Guides from other topics

All topics →