Costumes and Cosplay

How to Make a Steampunk Pocket Watch Prop

Make a steampunk pocket watch prop from a cheap quartz watch or EVA foam, with gears, an optional resin glass face, and a Victorian-style watch chain.

On this page
  1. Choose a case type
  2. Pick a base
  3. Decorate with gears and parts
  4. Glue small parts
  5. Make a resin glass face (optional)
  6. Build an oversized prop
  7. Finish
  8. Know where it sits
  9. Misconceptions
  10. Safety

A steampunk pocket watch prop can be a cheap quartz watch with new gears, or an oversized piece built from foam. Choose the case type first, then add the decoration and the finish. Keep safety in mind if the watch is vintage or if you use resin.

Choose a case type

  • Open-face: no lid.
  • Hunter: a lid covers the face.
  • Half-hunter: a lid with a small window.
  • Skeleton watch: a cut-away dial that shows the movement. It is a popular steampunk look.

Only hunters and half-hunters have lids. Not every pocket watch does.

Pick a base

  • A cheap quartz pocket watch
  • A broken vintage watch
  • An empty case
  • A craft blank

Decorate with gears and parts

Craft-pack gears, parts from broken movements, clock hands, keys, and brass findings all work. Craft-pack gears are usually stamped decorations rather than real watch parts. They still look right on a prop.

Glue small parts

Use E6000, two-part epoxy, or UV resin for small parts. Choose the adhesive by how much stress the joint will take.

Make a resin glass face (optional)

  • UV resin: apply thin layers under a 365 to 405 nm lamp, about 1 to 5 minutes per layer. Timing varies by brand.
  • Epoxy resin: usually mixed 1:1 by volume, and it cures in 24 to 72 hours. Timing varies by brand.
  • Doming: pour resin over arranged gears to make a clear glass face.

Read the manufacturer’s instructions for your brand. Uncured resin can irritate and sensitize skin, so use nitrile gloves and ventilation.

Build an oversized prop

For a bigger prop, use EVA foam or MDF, 15 to 30 cm (6 to 12 in) across. Print a dial to fit, and build the crown from foam clay.

Finish

Use Rub ’n Buff or metallic paint, then add a black wash to settle the details.

Know where it sits

  • Victorian men wore pocket watches. Men widely adopted wristwatches only after World War I.
  • The watch sits in a waistcoat pocket. An Albert chain runs from a T-bar at a waistcoat buttonhole to the pocket, and often carries a fob.
  • Women often used a chatelaine or a watch brooch instead.
  • On most pocket watches, the crown (the winding stem) and the bow (the chain ring) sit at 12 o’clock.

Misconceptions

  • Craft-pack gears are not real watch parts.
  • Victorian men didn’t commonly wear wristwatches.
  • Not every pocket watch has a lid. Only hunters and half-hunters do.
  • Resin isn’t safe to handle before it fully cures.

Safety

  • Don’t open or sand vintage luminous dials. Many pre-1970s dials contain radium.
  • Use nitrile gloves and ventilation with resin.
  • Wear UV-blocking glasses when you use a UV lamp.

For more accessories, see what steampunk accessories are. For aging a metal prop, see how to distress and age a steampunk costume. The full build order is in the steampunk costume tutorial.

The complete guide to costumes and cosplay

Steampunk Costume Tutorial: Build a Cosplay Step by Step
Read the guide

Keep exploring

Guides from other topics

All topics →