Costumes and Cosplay

DIY Steampunk Top Hat with a Free Pattern

Draft a steampunk top hat from your head measurement, with crown and brim sizes, an oval opening, and how to cover a foam or cardboard shell with fabric.

On this page
  1. What the pattern includes
  2. Measure your head
  3. Choose the crown and brim
  4. Draft the side band
  5. Shape the head opening
  6. Cut the shell
  7. Cover it with fabric
  8. Shape the brim with wire
  9. Add a band and decorations
  10. Mini top hats
  11. Notes on the look
  12. Safety

A steampunk top hat is a simple shape once you have three numbers: your head circumference, the crown height, and the brim width. This guide gives the measurements and drafting steps so you can draw the pattern yourself. Free printable patterns from other makers also exist, but quality varies, so check a source before you use it.

What the pattern includes

A basic top hat has three pattern pieces:

  • The crown side band
  • The tip, which is the top oval
  • The brim

Measure your head

Measure around your head about 1 cm above your eyebrows and ears. An adult average is about 56 to 58 cm (22 to 23 in). Add about 0.5 to 1 cm (1/4 to 3/8 in) of ease so the hat sits comfortably.

Hat sizes are not universal. US, UK, and metric sizes use different scales, so use your own measurement rather than a size from a store.

Choose the crown and brim

  • Victorian-style toppers: a crown about 15 to 20 cm (6 to 8 in) tall
  • Mini top hats: about 7 to 10 cm (3 to 4 in) tall
  • Brim: about 4 to 6 cm (1.5 to 2.5 in) wide. Many top hats curl up at the sides.

Draft the side band

  • Straight “stovepipe” crown: the side band is a rectangle. Its length is your head circumference plus ease plus seam allowance, and its height is the crown height.
  • Flared or tapered crown: the side band is an arc segment, and the top and bottom ovals differ in size. Draft this version on paper first and check it against your head.

Add a 1 to 1.5 cm (1/2 in) seam allowance to fabric pieces, or add glue tabs instead.

Shape the head opening

The head opening should be an oval, longer from front to back. A round opening gaps at the sides. A common starting point is about 2.5 to 3 cm longer front to back than side to side. Cut a test band from paper or cardboard and try it on before you trim the real pieces.

Cut the shell

Shell materials include EVA foam (2 to 5 mm), poster board, cardboard, buckram, and Fosshape. Foam keeps a crisp shape. Cardboard is cheaper but less sturdy.

Cover it with fabric

Cover the shell with velvet, wool felt, brocade, or faux leather. Use spray adhesive or contact cement, and work in a ventilated space.

Shape the brim with wire

Attach millinery wire or thin craft wire around the brim edge. The wire holds the curl. Bend back or tape over any cut wire ends so they don’t poke through the fabric or snag.

Add a band and decorations

Use a 2.5 to 4 cm (1 to 1.5 in) ribbon or leather strap for the band. Decorate it with goggles, gears, feathers, keys, or a small gauge. For goggles that pair well with the hat, see DIY steampunk goggles and monocles.

Mini top hats

A mini top hat attaches with an elastic strap, a hair comb, or alligator clips. Sizes from 7 to 10 cm (3 to 4 in) work well for this.

Notes on the look

  • The Hatter in Lewis Carroll’s book is called “the Hatter.” A female steampunk Mad Hatter costume can use an oversized top hat like this one.
  • The mercury linked to “mad as a hatter” came from felting, not from wearing hats.

Safety

  • Spray adhesive and contact cement need good ventilation.
  • Bend back or tape over cut wire ends.

For the full build order, including base clothing and finishing, see the steampunk costume tutorial. For other hat styles, see what steampunk accessories are.

The complete guide to costumes and cosplay

Steampunk Costume Tutorial: Build a Cosplay Step by Step
Read the guide

Keep exploring

Guides from other topics

All topics →