Costumes and Cosplay

How to Make Steampunk Goggles, Monocles and Gas Masks

Make steampunk goggles and a monocle from easy bases such as welding or swim goggles, and learn why a decorative gas mask filters nothing at all.

On this page
  1. Start with an easy goggle base
  2. Swap the lenses
  3. Make leather goggles
  4. Add an adjustable strap
  5. Finish the frame
  6. Build a monocle
  7. Gas masks: decoration or protection?
  8. Costume goggles are not safety eyewear

Steampunk goggles are usually built on an existing eyewear base, which keeps the work simple. The same goes for monocles. A gas mask is a different case: a costume version can look like it works, but it does not filter air.

Start with an easy goggle base

Several cheap bases work well:

  • Round flip-up welding goggles, usually with 50 mm lenses
  • Swim goggles
  • Plastic cups, bottle caps, or cardboard tubes
  • Craft foam, for a fully built frame

Swap the lenses

Welding goggles come with dark lenses. To see clearly, replace them with clear or tinted acetate or PETG cut to size. Dark welding lenses make walking hazardous, so don’t wear them indoors or while moving through a crowd.

Make leather goggles

Leather goggles use 4 to 5 oz veg-tan. Wet-mold the eyecups around a form, let them dry, then dye them. Only veg-tan leather can be molded this way.

Add an adjustable strap

Use 1 inch (25 mm) elastic, or a leather strap with a buckle, so the fit can be adjusted.

Finish the frame

Scuff plastic with 220 to 400 grit sandpaper, apply a plastic-bonding primer, then add metallic paint or Rub ’n Buff. Details that suit steampunk include brass rings, rivets or upholstery tacks, mesh side shields, flip-up extra lenses, and jeweler’s loupes.

In steampunk fashion, goggles are often worn on a hat brim or forehead rather than over the eyes, so a strap is optional for display pieces.

Build a monocle

A monocle frame is a ring about 30 to 40 mm across, with a chain or ribbon clipped to a lapel or buttonhole. A real monocle stays in place by being held between the brow and the cheek. A costume monocle can instead attach to a head strap or a glasses frame.

Gas masks: decoration or protection?

A steampunk gas mask can start from a prop mask, an EVA foam build, or a real half-mask respirator such as the 3M 6000 series. Only a real respirator with currently rated cartridges filters air. Decorative canisters filter nothing.

If you build a costume mask, keep these points in mind:

  • Leave the breathing paths open. Decorative filters must not block airflow.
  • Never open or use vintage gas mask filters. Surplus filters may be expired, and some older types have contained asbestos.
  • If breathing feels restricted, take the mask off and move to fresh air. Poorly vented masks can let carbon dioxide build up.
  • Apply an anti-fog spray to lenses. Ventilation holes also reduce fogging.

If you want a mask that looks like it works, build it as a prop. If you need protection, use a real respirator with rated cartridges for the hazard it is rated for.

Costume goggles are not safety eyewear

Only lenses marked ANSI Z87.1 (US) or EN 166 (EU) are rated as eye protection. Homemade lenses are not rated, even when they are clear. Narrowed vision also raises the risk of trips on stairs and in crowds, so test your goggles at home before you wear them out.

For the names and history behind the styles, read what steampunk goggles are called. For where eyewear fits in the full outfit, see the steampunk costume tutorial. A DIY top hat can also carry goggles on its band.

The complete guide to costumes and cosplay

Steampunk Costume Tutorial: Build a Cosplay Step by Step
Read the guide

Keep exploring

Guides from other topics

All topics →