Steampunk wings are a frame, a membrane, and a harness. The frame sets the shape, the membrane gives the look, and the harness keeps the weight where it belongs. Static wings read well in photos, so motors are optional.
Choose a wing style
- Mechanical skeleton: a “bat” frame with a fabric or leather membrane
- Feathered ornithopter: wings covered with feathers
- Clockwork insect or butterfly: a smaller, more decorative shape
Pick a frame material
- 1/2 in PVC pipe
- Aluminum rod or flat bar
- Wooden dowels
- 9 to 12 gauge wire
- EVA foam strips for lighter, decorative sections
Make the membrane
Organza, canvas, faux leather, or parchment-print fabric all work. Glue or stitch the membrane to the frame.
Make the feathers
Use craft feathers, or cut feathers from 2 to 5 mm EVA foam or craft foam. Layer them from tip to root, so each feather overlaps the one below it.
Mount the wings on a harness
Mount the wings on a backplate made from EVA foam, Kydex, or thin plywood. Strap the backplate on with a harness or thrifted backpack straps. The shoulder armor and harness guide covers harness construction.
Keep the pivot point and the weight close to your spine, between your shoulder blades. Don’t attach the wings to the costume fabric. A harness keeps the clothes from sagging.
Add articulation (optional)
Two common options:
- Bolt pivots with pull cords made from bike brake cable
- Servo motors driven by a microcontroller such as an Arduino
Motors are not required. Static wings read well in photos.
Size and transport
Folding or removable wings help with transport and doorways. US interior doors are typically 30 to 36 in (76 to 91 cm) wide. Huge spans make crowds and seating hard, so keep the span modest. Some conventions set wingspan or backpiece limits, and these vary by event.
Paint and detail
Paint the frame brass, copper, or gunmetal. Add gears, rivets, and gauges at the joints. These details make the frame look mechanical.
Adhesives
- Contact cement: for foam
- Epoxy: for metal-to-PVC joints
- E6000: for decorative parts
Hot glue won’t hold structural joints. Use bolts or epoxy for anything that carries load.
Test wear
Wear the wings for at least 30 minutes before the event. Comfortable weight varies by person, so judge it on your own body.
Misconceptions
- Bigger isn’t better. Huge spans make crowds and seating hard.
- Wings don’t need motors to look good. Static wings read well in photos.
- Hot glue won’t hold structural joints. Use bolts or epoxy.
Safety
- Cap or tape sharp wire and rod ends.
- Stay aware of your span in crowds, and fold the wings in tight spaces.
- Secure servo batteries and wiring, and keep them away from your skin.
For another back-mounted prop, see the steampunk jetpack. For the full outfit, see the steampunk costume tutorial.