DIY Crafts

Steampunk Gears and Cogs: Cardboard DIY and Where to Buy

Make steampunk gears from cardboard with printable templates, finish them to look like metal, and find affordable places to buy or salvage gears.

On this page
  1. Make cardboard gears
  2. Seal before you paint
  3. Finish the gears
  4. Gears that mesh
  5. Where to buy steampunk gears
  6. Recycled and thrifted sources
  7. Common mistakes
  8. Safety

Gears are one of the signature elements of steampunk, and you don’t need real metal to get the look. Painted card reads as metal from a normal viewing distance, and card is cheap and easy to cut.

Make cardboard gears

Choose a card that suits the job:

  • Cereal-box chipboard for thin, fine detail.
  • Corrugated card for thicker, lighter gears.
  • Mat board or book board for crisp edges.

Then follow these steps:

  1. Get a template. Use a free online gear generator, such as Matthias Wandel’s woodgears.ca, or a printable gear sheet.
  2. Glue the template onto the card.
  3. Cut it out with a sharp craft knife on a cutting mat.
  4. Punch the centre hole with a hole punch.
  5. Laminate two or three layers for thickness and rigidity.

For a textured, industrial look, use corrugated card and peel off one face to expose the flutes.

Seal before you paint

Seal the card with gesso or Mod Podge before painting. Sealing stops the card from warping and keeps it from soaking up paint.

Finish the gears

Use a black base, then metallic paint or Rub ’n Buff, then a dark wash to settle into the recesses. Brass brads work well as rivets or hub caps.

Gears that mesh

Gears that need to turn together must share the same tooth size, called the pitch or module. Decorative gears don’t need to mesh, so you can mix sizes freely if they’re only for display. For the maths behind a working gear train, see how to make a homemade gearbox.

Where to buy steampunk gears

  • Watch-part lots from marketplaces such as Etsy, eBay and Amazon. Bags often hold mixed gears, springs, faces and hands, and quality varies widely.
  • Tim Holtz Idea-ology gears from craft shops.
  • Metal charms from craft stores.
  • Laser-cut MDF or wood gears, which suit larger or matched sets.
  • 3D-printed PLA or laser-cut acrylic, which can give you a matched set in one size.
  • Cast gears made from polymer clay or resin in silicone molds, which give repeatable shapes.

Check what you’re buying. Bulk watch-part bags are not all brass, since many are steel or plated. Gears from quartz clocks are mostly plastic, while brass gears usually come from mechanical clocks.

Recycled and thrifted sources

Thrift-store clocks, broken mechanical watches, old toys and printers can all yield usable gears. Strip them carefully, since the parts may be stuck with old grease.

Common mistakes

  • Real metal gears aren’t needed for the look. Painted card works well.
  • Gluing gears everywhere isn’t a design. Group them with a purpose, such as a single drive train or a cluster around a dial.

Safety

  • Pre-1960 luminous dials and hands may contain radium. Don’t sand, cut or grind them.
  • Change craft-knife blades often, since dull blades are more likely to slip.
  • Keep tiny watch parts away from small children and pets.

For a clock that uses gears on its face, see the DIY steampunk clock. For more builds, see the steampunk DIY crafts guide.

The complete guide to diy crafts

Steampunk DIY Crafts: Projects, Props and Gifts to Make
Read the guide

Keep exploring

Guides from other topics

All topics →