A steampunk phone case is a simple way to carry the style every day. The decoration sits on the case, but the base case does the protecting. Choose the base first, keep the decorations light, and make sure the phone still charges and fits.
Start with a hard shell
Use a plain hard-shell polycarbonate case. Silicone cases resist most glues, and resin doesn’t stick to silicone or soft TPU reliably. A hard shell gives glue and paint something to grip.
Prepare and dry-fit
Scuff the back with 220 to 400 grit sandpaper, then wipe it with isopropyl alcohol before you glue or paint. Keep the camera, flash, buttons, speaker and port cutouts clear.
Dry-fit the phone in the case before gluing anything. Check that every button still presses and that the ports are reachable.
Choose flat, light embellishments
Flat-backed gears, watch faces and filigree sit closer to the case and snag less in pockets and bags. Keep the added thickness low. Deep embellishments make the phone wobble when it lies flat, and they catch on things.
Adhesives and sealing
Use E6000 or two-part epoxy for permanent bonds, and let the case cure for 24 to 72 hours before use. Seal loose embellishments under UV resin or doming resin, so glitter and small parts don’t snag or fall off.
Hot glue won’t stay on a phone case through daily handling and pocket heat.
Leather, paint and clay
A thin leather wrap, about 1 to 2 oz, can be glued on with contact cement and trimmed around the cutouts. To paint the case, use a plastic primer, a metallic coat, a dark wash and a clear coat.
Polymer clay designs should be baked on a separate surface, then glued on. Don’t bake the plastic case itself.
Wireless charging and MagSafe
Qi wireless charging works through thin plastic, but metal parts on the back block it. Metal can also get hot while charging. If the case has metal on the back, remove the case before you charge.
MagSafe needs a magnet ring in the case and clear alignment with the charger. Heavy décor can weaken the hold, so keep the back light.
What décor can’t do
A decorated case isn’t more protective. Drop protection comes from the base case, so choose a protective base first and decorate it second. For ideas on materials, see what materials are used in steampunk.
Safety
- Remove the phone before gluing, painting or doing resin work.
- Keep small glued parts away from young children, since they can come loose.
- Remove the case before charging if it has metal on the back, because that metal can get hot.
For a larger tech project, see steampunk computer and keyboard mods. For the wider range of projects, see the steampunk DIY crafts guide.