A steampunk journal combines hand bookbinding with a mixed-media cover. A Coptic binding has an exposed spine, lies flat and needs no glue in the sewing, which suits a journal that gets written in often. The cover is where the steampunk details go.
Materials
- Paper: mixed-media paper, around 98 lb (160 gsm), which handles wet media well.
- Book board: Davey board, about 2 mm (0.080 inch) thick.
- Glue: acid-free PVA, such as Lineco.
- Thread and needle: waxed linen thread and a curved needle.
- Tools: an awl, a bone folder and a cutting mat.
Fold the signatures
A signature is a set of folded sheets. Four to six sheets per signature gives 16 to 24 pages. Fold each sheet in half, then nest the sheets inside one another.
Keep the paper grain parallel to the spine. To find the grain, bend a sheet both ways. It bends more easily along the grain. Use a bone folder for crisp creases.
Sew a Coptic binding
Mark the sewing holes on a template, then pierce them with an awl. Keep the end holes about 1/2 to 3/4 inch from the head and tail of the spine. Sew each signature onto the others using a Coptic stitch pattern.
Coptic binding lies flat, and it works with thick card as well as paper.
Make the covers
Cover the book board with paper, cloth or leather. For a wrap-style leather journal, use leather of about 3 to 4 oz (1.2 to 1.6 mm), which is a typical range.
Glue the covering on with acid-free PVA. Press it under heavy books overnight, with wax paper between the layers. Regular school glue can warp the board and yellow over time.
Sizes
A traveler’s notebook “regular” insert measures 110 × 210 mm. Measure your insert before you cut the cover, and allow a little extra for the covering.
Mixed-media steampunk cover
Build the cover in layers:
- Coat the board with gesso.
- Add texture or modelling paste.
- Press in gears, keys or watch parts while the paste is still soft.
- Paint the cover.
- Dry-brush a metallic finish over it.
- Seal it.
Keep the gears low-profile. Bulky gears stop the journal from lying flat or stacking neatly on a shelf. For ideas on materials, see what materials are used in steampunk.
Age the pages
Distress inks or a tea stain can age the pages. A little ageing suits the style, but keep the effect light so the pages stay readable.
Closures
Choose a leather strap with a button, an elastic band, a brass clasp or a wrapped cord. The closure should hold the journal shut without bending the spine.
Common mistakes
- Grain across the spine: the pages go wavy, and the book won’t close neatly.
- School glue: it warps the board and yellows over time. Use acid-free PVA instead.
- Bulky gears: they stop the journal from lying flat.
Safety
- Work on a cutting mat, and pierce away from your fingers when you use an awl.
- Change craft-knife blades often, since dull blades are more likely to slip.
- Ventilate when you use spray sealers.
For a related mixed-media project, see the steampunk shadow box. For the full set of projects, see the steampunk DIY crafts guide.