DIY Crafts

DIY Steampunk Shadow Box With Gears and Found Objects

Make a steampunk shadow box with gears, keys and found objects. Covers depth, backgrounds, attaching items, lighting and keeping keepsakes safe.

On this page
  1. Choose a box and depth
  2. Pick a background
  3. Lay it out before you glue
  4. Build depth
  5. Choose found objects
  6. Attach the pieces
  7. Labels and lighting
  8. Protect the keepsakes
  9. Safety

A steampunk shadow box turns found objects into a small framed scene. Layered gears, keys, watch parts and old paper suit the style well. Plan the layout first, then attach the pieces, so each item has room to be seen.

Choose a box and depth

Shadow boxes commonly have an inside depth of about 1 to 3 inches. Choose a depth that suits your deepest object. Listed depths are sometimes outer measurements rather than the usable inside depth, so measure the inside before you buy.

Clean the glass inside before you close the box, since fingerprints and dust are hard to remove afterwards.

Pick a background

Old maps, sheet music, book pages and tea-stained paper make good backgrounds. Burlap, linen, velvet or painted foam board also work. Fabric-wrapped foam board lets you pin objects in place with sewing pins or T-pins.

Lay it out before you glue

Dry-fit the whole layout, then photograph it before you glue anything. Give the scene a clear focal point. Odd-numbered groups, the rule of thirds and a limited palette tend to look better than a crowded arrangement. Crowding loses the focal point.

Build depth

Use foam spacers or small wood blocks behind the items in front, so they sit higher than the rest. This gives the box a layered look.

Choose found objects

Watch parts, keys, skeleton keys, gauges, pocket watches, vials, feathers, antique photos, typewriter keys and butterflies all suit the style. For gears, see steampunk gears and cogs.

Attach the pieces

  • Hot glue: for light items only. It won’t hold metal objects long term, especially when the box hangs upright.
  • E6000 or epoxy: for metal and glass.
  • Museum putty: for pieces you may want to remove later.
  • Thin wire or fishing line: for heavy pieces.

Labels and lighting

Add labels in a typewriter-style font, or write them on tea-stained tags. For light, use battery LED fairy lights or puck lights, and hide the battery pack behind the backing.

Protect the keepsakes

If you want photos or documents to last, use acid-free paper and backing. Ordinary paper can yellow and fade over time, so use copies of family photos rather than originals.

Safety

  • Luminous dials and hands made before about 1960 may contain radium. Don’t sand, break or grind them.
  • Use LEDs, not incandescent bulbs, inside a closed box that contains paper.

For a clock build that uses similar found parts, see the DIY steampunk clock. For the full range of projects, see the steampunk DIY crafts guide.

The complete guide to diy crafts

Steampunk DIY Crafts: Projects, Props and Gifts to Make
Read the guide

Keep exploring

Guides from other topics

All topics →