DIY Crafts

DIY Steampunk Clock: Build One From Found Parts

Build a steampunk clock from found parts: pick a quartz movement, size the shaft to your dial, fit the hands in order and finish the face with metal and wash.

On this page
  1. Pick a movement
  2. Choose a face
  3. Hang the hands
  4. Add décor gears
  5. Finish the face
  6. Common mistakes
  7. Safety

A steampunk clock looks like a machine but keeps time with a quartz movement hidden behind the face. The décor gears are for show, so the build is mostly about sizing the movement, fitting the hands and finishing the face. Found parts keep the cost low.

Pick a movement

The simplest option is a quartz clock movement kit, which runs on one AA battery. Check these measurements before you buy:

  • Shaft length: match it to the thickness of your dial. A 3/4-inch shaft suits dials up to about 1/2 inch, but check the maker’s chart.
  • Mounting hole: a standard threaded-shaft movement usually needs a hole of about 5/16 to 3/8 inch (8 to 10 mm). Sizes vary by kit.
  • Torque: long or heavy hands, about 12 inches or more, need a high-torque movement.
  • Sweep or tick: sweep (continuous) movements are silent. Step movements tick.

Choose a face

Almost any flat, round item can work as a face:

  • Old vinyl records
  • Wood rounds
  • Cake tins
  • Bicycle wheel rims
  • Saw blades
  • Pizza pans
  • Picture frames

Drill the centre hole to match your movement’s shaft, and check the fit before you paint.

Hang the hands

Fit the hands in this order:

  1. Hour hand: press it on. It is a press fit.
  2. Minute hand: secure it with a nut or cap.
  3. Second hand: fit it last.

Set both the hour and minute hands to 12:00 before you press the hour hand down. A minute hand should reach about to the minute track. As a rule of thumb, make the hour hand about two-thirds the length of the minute hand.

Add décor gears

Glue décor gears to the face where they clear the hands’ sweep. Dry-fit them with the hands mounted first, so you can see where the hands pass. Décor gears don’t drive the hands, so position them for looks rather than function.

Brass tacks make good hour markers.

Finish the face

Paint the face with a black base, then add metallic paint or Rub ’n Buff. Finish with a dark wash to settle into the recesses. For more on gears, see steampunk gears and cogs.

Common mistakes

  • Hand sizes: hands must match the shaft and hole size. Buy the hands as a set with the movement.
  • Heavy hands: if the hands are heavier, they need a high-torque movement. A new battery won’t solve it.
  • Gear material: quartz clock gears are usually plastic. Brass gears usually come from mechanical clocks.

Safety

  • Mechanical clocks store energy in the mainspring. Let it down properly before you take the clock apart, or it can injure you.
  • Luminous paint on dials and hands made before about 1960 may contain radium. Don’t sand or scrape it.
  • Wear eye protection when you drill or cut metal faces.

For a related build that uses found objects, see the DIY steampunk shadow box. For the wider range of projects, see the steampunk DIY crafts guide.

The complete guide to diy crafts

Steampunk DIY Crafts: Projects, Props and Gifts to Make
Read the guide

Keep exploring

Guides from other topics

All topics →