Steampunk ornaments are a fun way to add brass and gears to a tree. Most use clear fillable balls, old bulbs or clay. They need a few careful steps, especially for sealing and battery safety.
Fillable clear balls
Fillable clear balls, in glass or plastic, come in common sizes around 60, 80 and 100 mm. Fill them with watch parts, small gears, keys, tiny clock faces, copper wire or mini Edison-bulb LEDs.
To fill one, remove the metal cap, add the parts with tweezers or a paper funnel, then glue the cap back on with E6000 or epoxy. Hot glue gets brittle on glass in cold storage, so avoid it for the cap.
Bulk watch-part bags are fine for this project. You don’t need antique parts.
Paint plastic ornaments
Use a plastic primer, then a metallic paint or Rub ’n Buff, then a dark wash. Plastic ornaments scratch easily, and spray paints can cloud them unless the label says they’re safe for plastic.
Old bulbs
Old incandescent bulbs make good Edison-style ornaments. Add a wire-wrapped hanger, and handle the glass carefully, since it breaks easily.
Mini top hats and airships
A mini top hat is made from a cardboard tube band and a card brim. Paint it black, then add a ribbon and a small gear.
Airships can be oval ornaments or paper-mâché eggs, with a small basket hung below.
Clay and salt dough
Salt dough bakes at about 250°F (120°C) for 2 to 3 hours, depending on thickness. Seal all sides once it has cooled. Unsealed salt dough absorbs moisture and can go mouldy.
Polymer clay cures at about 110 to 130°C (230 to 275°F), typically 15 to 30 minutes per 1/4 inch of thickness. Times vary by brand. Stamp the clay with gears or watch parts before baking, for an embossed look.
Hangers
Use 18 or 20 gauge wire for hangers, and twist each loop closed fully. Heavy metal ornaments need a sturdy branch. Lighter ornaments suit artificial trees better.
Safety
- Button cells: LED ornaments need the battery door secured. A swallowed button cell is a medical emergency, so get medical help straight away.
- Glass and small parts: hang glass ornaments high, or avoid them around toddlers and pets.
- Salt dough: don’t eat it, and don’t let pets eat it. It is very high in salt.
For a candle project with a similar look, see DIY steampunk candle holders. For party decorations in the same style, see steampunk party decorations and invitations.