Steampunk layers Victorian styling over visible steam-age machinery: brass, copper, leather, dark wood, glass, rivets and gears. K. W. Jeter used the word in a 1987 letter to Locus magazine, and the look has since grown into fashion, décor, props and craft projects. Most of it is easy to start with. Paint does much of the work, and the best-looking builds usually rely on a few purposeful details rather than many parts.
This guide groups the main project types on this site and links to a full build for each one.
Finishing steps most builds share
Most steampunk projects follow the same sequence: clean, scuff, prime, paint a dark base, add a metallic coat, dry-brush the raised edges, wash the recesses with a dark tint, then seal.
- Clean and scuff. Remove grease and dust, then scuff glossy surfaces with 220 to 400 grit sandpaper so paint can grip.
- Prime. Use a plastic primer on plastic. Krylon Fusion and Rust-Oleum 2X are commonly used, though scuffing first is still a good idea.
- Metallic finish. Metallic paint or Rub ’n Buff, a wax-based metallic paste, gives an aged-metal look when rubbed on with a fingertip and buffed.
- Wash and seal. A thinned dark wash settles into recesses. Finish with a matte or satin clear coat, since gloss tends to look like plastic.
Two common mistakes are worth avoiding. Gluing gears onto an object doesn’t make it steampunk on its own, because parts look most convincing when they seem to do a job. Real brass isn’t required either: painted plastic, card and foam read well at normal viewing distance.
Gift projects
Small builds make good presents:
- Steampunk USB flash drives put a metal housing around a cheap drive. The circuit board needs insulating first.
- Journal covers and notebooks combine a hand-sewn Coptic binding with a mixed-media cover.
- Christmas ornaments can use fillable clear balls, old incandescent bulbs or baked clay.
- Candle holders can be built from pipe or copper fittings, using heat-safe glue.
- Medals pair a medallion with ribbon and a pin back. Inventing your own order is part of the fun.
- Shadow boxes layer found objects behind glass.
Light-switch plates and keychains are also common easy gifts.
Décor and home projects
- The industrial pipe lamp uses pipe fittings, a socket and a cord. Check the wiring carefully before you plug it in.
- A steampunk clock can use a quartz movement with decorative gears on the face.
- A steampunk terrarium suits moss and small ferns in a sealed glass container.
- Gears and cogs cut from cardboard are a cheap way to add texture to a project.
- For a party, see steampunk party decorations and invitations.
Props and costumes
Props are often built from EVA foam, Worbla thermoplastic, 3D-printed PLA, resin or cardboard. Worbla softens at about 90°C (194°F) and can be shaped while warm. For an overview of materials and methods, see how to make homemade props.
Modified Nerf blasters are a common starting point for a prop gun. See steampunk Nerf gun mods for finishing steps, and read the section on the orange tip before you start. Many conventions also have rules about realistic-looking props.
Tech mods
A steampunk keyboard or PC case is a larger project. Steampunk computer and keyboard mods covers typewriter-style keycaps, brass trim and keeping case vents clear. A phone case is a smaller build, and how to make a steampunk phone case explains how to keep wireless charging working.
Whimsical builds
A steampunk gnome is a playful project. A sock or fabric cone, weighted with rice, makes the body. Add a faux-fur beard, a wooden bead nose, washer-and-bead goggles and a small gear on the hat. Keep small parts firmly glued, since they are a choking hazard for young children.
Where to start
Pick one small project to learn the finishing sequence, such as a set of cardboard gears or a journal cover. Then move on to a larger build that uses the same steps.
Safety basics
- Use spray paint, E6000 and contact cement outdoors or with good ventilation.
- Wear eye protection when using a rotary tool or cutting metal.
- Keep watch parts and button batteries away from children and pets.
- Dials and hands on clocks and watches made before about 1960 may carry radium luminous paint. Don’t sand, cut or grind them.