DIY Crafts

Steampunk Nerf Gun Mods

Steampunk Nerf gun mods for prop builds: choose a base blaster, paint in thin coats, add gears and fittings, and keep the orange tip visible.

On this page
  1. Pick a base blaster
  2. Take it apart carefully
  3. Prep and prime
  4. Paint in thin layers
  5. Steampunk details
  6. Faux wood grain on the grip
  7. Mask what must stay clear
  8. Prop-only versus functional builds
  9. Don’t remove the orange tip
  10. Local rules and carrying
  11. Safety

A cheap Nerf blaster can become a convincing steampunk prop with paint, gears and a few fittings. This guide is for display and costume props. It also covers the rules that matter most: keep the orange tip, follow the law where you live, and check the rules of any event you attend.

Pick a base blaster

The Nerf Maverick REV-6 is a popular base. It has a six-dart revolving cylinder, came out around 2004 and is discontinued, but it is widely sold second-hand. Other common bases include the Strongarm, Longshot, Rough Cut and Retaliator. Blasters with distinctive shapes make the most of added details.

Take it apart carefully

Use a small Phillips screwdriver. Photograph each step so you can reassemble it later, and bag the springs and screws separately. Paint the shell pieces separately from the mechanism, so the moving parts and plunger don’t get gummed up.

Prep and prime

Wash the parts, then scuff them with 400 grit sandpaper. Prime with a plastic primer such as Krylon Fusion or Rust-Oleum 2X. Spray paint labelled for plastic can still chip without scuffing and a clear coat.

Paint in thin layers

Use this order:

  1. Black base coat
  2. Brass, copper or gunmetal metallic layer
  3. Dry-brushed silver highlights
  4. Thinned black or brown wash
  5. Matte or satin clear coat

Use thin coats throughout. Thick paint jams slides, triggers and the cylinder’s rotation. Let the paint cure fully, often for 24 hours or more, before reassembling.

Steampunk details

Add gears, pipe fittings, gauges, brass tacks, leather wraps or copper wire coils. These should look like they do a job, rather than covering the blaster in decoration. For more on that principle, see how do you make steampunk.

Faux wood grain on the grip

For a wood-look grip, paint a tan base coat, then drag a dark brown paint across it with a stiff brush while it’s still wet. Let it dry before you add the clear coat.

Mask what must stay clear

Use painter’s tape to cover the barrel, the dart cylinder and the orange tip, so paint doesn’t get into the mechanism or cover the markings.

Prop-only versus functional builds

A display or prop-only build can drop the internal parts. A blaster you plan to use functionally should keep its stock springs and air restrictors. Removing an air restrictor is a performance change, not a cosmetic one, so it doesn’t belong in a steampunk finish.

Don’t remove the orange tip

Removing or painting over the orange tip is not just a cosmetic change. It can cause dangerous confusion with real firearms, so keep it visible.

Local rules and carrying

In the US, federal law requires toy guns sold to have a blaze-orange marking. Some states and cities also restrict realistic-looking imitation guns, and the rules vary by place. Never carry a painted blaster openly in public. Many conventions don’t allow blasters, and many others require props to be checked or bar realistic-looking designs. Check the rules before you travel to an event.

For props made from other materials, see how to make homemade props.

Safety

  • Spray paint outdoors, or somewhere well ventilated.
  • Wear eye protection when you take apart spring-loaded parts.
  • Keep the orange tip visible at all times.

For the wider range of steampunk projects, see the steampunk DIY crafts guide.

The complete guide to diy crafts

Steampunk DIY Crafts: Projects, Props and Gifts to Make
Read the guide

Keep exploring

Guides from other topics

All topics →