DIY Crafts

DIY Steampunk Candle Holders

Make steampunk candle holders from pipe fittings, copper or jars. Learn candle sizes, heat-safe glue, wick trimming and burn limits before you light a flame.

On this page
  1. Know your candle size
  2. Build a pipe holder
  3. Other bases
  4. Use glue that tolerates heat
  5. Clean and seal
  6. Flameless options
  7. Safety

Steampunk candle holders are simple projects, and many are built from pipe fittings, copper or jars. The candle sizes, glue choices and burn limits matter more than the look, so check those first.

Know your candle size

  • Taper candles: the standard base is 7/8 inch (22 mm) across.
  • Tealights: about 1.5 inches (38 mm) across, burning for about 4 hours. Burn time varies by brand.
  • Votives: about 1.5 to 2 inches across, burning for about 10 to 15 hours. They need a holder, and they melt completely as they burn.

Build a pipe holder

Build the holder from black iron or copper fittings. Use a floor flange as the base, then add a taper cup or a tealight cup on top. Copper plumbing fittings of 3/4 inch with metal end caps are often used as taper cups. Check the fit with your candles before you glue anything.

Other bases

Mason jars, old gears, clock parts, wooden blocks, spark plugs and glass lanterns can all work as bases. Make sure the base is stable and can take the weight of the candle.

Use glue that tolerates heat

Use JB Weld or a high-temperature epoxy for parts near heat. E6000 is only rated to about 180°F (82°C). Hot glue softens with heat, so don’t use it on any part near the flame or the cup.

Clean and seal

Degrease and seal black pipe so it doesn’t leave residue on the surface below. Spray paint and clear coats aren’t heat-rated unless the label says so. Without that rating, they can blister and smoke near a flame.

Flameless options

Battery LED candles avoid an open flame, but they aren’t automatically safe for every setting. Check the product’s heat rating, and keep it away from anything that can burn, the same as you would a real candle.

Safety

  • Trim the wick to about 1/4 inch (6 mm) before every burn.
  • Burn for no more than about 4 hours at a time, and let the wax cool before you relight.
  • Keep lit candles at least 12 inches (30 cm) from anything that can burn. That distance is often cited in fire-safety guidance.
  • Never leave a candle burning unattended, or within reach of children and pets.
  • Set metal holders on a heat-resistant surface. Tealight cups and pipes get hot enough to burn skin.

For a larger glass project, see the steampunk terrarium. For party table ideas, see steampunk party decorations and invitations.

The complete guide to diy crafts

Steampunk DIY Crafts: Projects, Props and Gifts to Make
Read the guide

Keep exploring

Guides from other topics

All topics →