You make steampunk by starting with an ordinary object, deciding what it does in a fictional world, and then adding Victorian-style finishes, visible mechanical details and some wear. Paint and a dark wash usually do most of the work.
Start with a base object
Pick something you can change: a thrift-store item, a toy, a box, a lamp, a hat or a garment. Choose a base that is easy to take apart if you can, and clean off any grease or dust before you start.
Decide what it does
Give the object a job in the story, such as an aether detector or a pressure regulator. The details then follow the function. A gauge belongs near a valve, and a tube should lead somewhere. Parts that seem to do a job look more believable than parts that are just stuck on.
Prepare the surface
Take the piece apart where possible. Scuff glossy surfaces with 220 to 400 grit sandpaper, then prime them. Use a plastic primer on plastic. Priming gives the paint something to grip.
Paint in layers
A typical finish runs in this order:
- Base coat: black or dark brown.
- Metallic coat: brass, copper or gunmetal paint.
- Dry-brushed highlights: load a stiff brush, wipe most of the paint off, then flick the bristles across raised edges.
- Wash: a thinned black or brown wash that sinks into the recesses.
- Seal: a matte or satin clear coat. Gloss tends to look like plastic.
For a quicker metallic look, rub a tiny amount of Rub ’n Buff onto the raised areas with a fingertip, then buff it once it dries. A gloss metallic spray on its own rarely looks like aged metal, so the wash matters.
Add details with purpose
Gears, rivets, gauges, tubing, copper wire and leather straps add texture. Brass brads or puffy paint dots can stand in for rivets. A few well-placed details usually look more convincing than many scattered ones.
Use E6000 or epoxy for bonds that need to last. Hot glue suits light, temporary or foam parts, but it can let go under stress.
Weather the piece
Sponge on rust tones, add a dark wash and sand the edges lightly to suggest wear. Keep the weathering consistent across the piece so it looks like one object.
Dress the part
For costume pieces, start with a Victorian silhouette such as a waistcoat, a corset, a bustle skirt or a frock coat. Add goggles, belts and small accessories. One or two well-chosen pieces are often enough, so you don’t need a full period outfit.
Tools to have on hand
A craft knife, pliers, a hot glue gun, a rotary tool, a drill, files and sandpaper cover most steampunk builds. For a list of finishing products, see what materials are used in steampunk.
Safety
Spray paints, E6000 and contact cement need good ventilation, so work outdoors or in a well-ventilated room. Wear eye protection when using a rotary tool.
For prop-building methods, including foam and 3D prints, see how to make homemade props. For the wider range of projects, see the steampunk DIY crafts guide.