Costumes and Cosplay

DIY Steampunk Shoulder Armor and Harness

Make steampunk shoulder armor from layered EVA foam lames, then fit it to a leather or faux-leather harness with rivets, roller buckles, or Chicago screws.

On this page
  1. What shoulder armor is
  2. Pattern the shoulder
  3. Cut and shape the plates
  4. Join the lames so they flex
  5. Build the harness
  6. Attach the pauldron
  7. Finish leather edges
  8. Fake rivets
  9. Paint the foam
  10. Misconceptions
  11. Safety

Steampunk shoulder armor is a pauldron: a shoulder cap with overlapping plates called lames. A harness holds it in place. Foam and faux leather are fine for most builds, and real leather is not required.

What shoulder armor is

A pauldron is a shoulder cap with overlapping lames. Most pauldrons have 2 to 4 lames.

Pattern the shoulder

You can pattern the shoulder with paper, or with the plastic-wrap-and-tape method used for the mechanical arm.

Cut and shape the plates

  • Use EVA foam at 5 to 6 mm for the base plates, and 2 mm for edging and details.
  • Worbla or leather are alternatives.
  • Dome the foam with a heat gun, then shape it over a ball or your knee. The right heat depends on the foam’s density, so test on scrap first.

Join the lames so they flex

Join the lames on their undersides with leather straps, elastic, or rivets. This lets them move with your shoulder. Contact cement alone won’t hold flexing strap joints, so rivet or stitch them.

Build the harness

  • Strap width: 25 to 38 mm (1 to 1.5 in)
  • Material: 6 to 8 oz veg-tan, faux leather, or thrifted belts
  • Styles: an X-back chest harness, a single-shoulder baldric, or a full harness with a belt connection

Use O-rings or D-rings at strap junctions. Roller buckles, double-cap rivets, Chicago screws, and snaps are common hardware choices.

Attach the pauldron

Attach the pauldron to the harness with Chicago screws, rivets, or elastic. Chicago screws are removable, which makes transport and repairs easier.

Finish leather edges

Bevel the edges, sand them, then burnish with water or gum tragacanth. Useful tools include a rotary punch, a rivet setter, an edge beveler, a utility knife, and a mallet. Wear eye protection when you hammer rivets.

Fake rivets

Domed upholstery tacks, foam clay dots, or hot glue dots painted metallic all read as rivets from a short distance.

Paint the foam

  1. Heat-seal the foam with a heat gun.
  2. Apply Plasti Dip.
  3. Add a metallic base.
  4. Add Rub ’n Buff highlights.
  5. Apply a black wash.

Misconceptions

  • Real leather isn’t required. Old belts, faux leather, and foam all work.
  • A harness is not a bandolier. A bandolier holds ammunition or loops.
  • Tighter is not better. Straps need room for arm movement.

Safety

  • Ventilate when you use leather dye and contact cement.
  • Wear eye protection when hammering rivets.

Leather bracers use the same veg-tan skills, so see leather bracers and wrist cuffs next. For the full outfit, see the steampunk costume tutorial.

The complete guide to costumes and cosplay

Steampunk Costume Tutorial: Build a Cosplay Step by Step
Read the guide

Keep exploring

Guides from other topics

All topics →