A steampunk jetpack is a costume prop, not a machine. Two soda bottles, a backplate, and a few painted details can do the job. The build is light and simple, and the safety rules matter more than the parts.
Start with the tanks
The classic budget base is two 2-liter soda bottles, about 10 to 11 cm (4 in) across, mounted side by side. Other tank options include cardboard mailing tubes, PVC pipe, thermoses, emptied fire extinguisher shells, and foam cylinders.
Mount the tanks high and close to your back, so the pack does not pull you backward.
Build the backplate
Cut the backplate from cardboard, foam board, EVA foam, or thin plywood. Mount it on a thrifted backpack or on harness straps. The shoulder armor and harness guide covers harness construction.
Add nozzles
Nozzles can be funnels, plastic cups, bottle caps, or the cut-down tops of bottles.
Make the flames
Flames can be cut from cellophane, organza, tissue paper, or felt. Orange and red LEDs, or a small fan, can make fabric flames move. If you add lights, secure the battery and keep the wiring insulated.
Add details
Gauges (old clock faces work well), valves, tubing, faux rivets, leather straps, and brass bands make the pack look more like a machine.
Paint the tanks
PET bottles need a plastic-bonding primer before paint. Krylon Fusion is one example. Without primer, spray paint can flake off the plastic. Then add a copper, brass, or gunmetal base, Rub ’n Buff accents, and a black wash for grime.
Keep the width and weight reasonable
Keep the total width within your shoulder width, so you don’t bump into people in crowds or struggle through doorways. Heavier doesn’t look more real. Light, well-painted builds usually read better in photos and at events.
Kids’ version
For a child’s version, cereal boxes and bottles work well. Use lightweight felt flames.
Misconceptions
- Jetpacks are not Victorian technology. They are a retro-futurist idea within the genre.
- Most venues ban real smoke, flame, or fog effects.
- Heavier doesn’t look more real.
- Spray paint won’t stick to bare plastic without primer.
Safety
- Don’t use pyrotechnics, open flame, or fog effects.
- Secure battery packs and insulate the wiring.
- Check the convention’s backpiece size and prop rules, which vary by event.
For other back-mounted props, see steampunk wings for cosplay and how to make a steampunk backpack. The full build order is in the steampunk costume tutorial.