Fashion

How to Make Steampunk Shoes and Boot Covers

How to make steampunk shoes and boot covers: pick a sturdy base shoe, decorate it with paint and metal details, or sew a boot cover from a pattern.

On this page
  1. Victorian footwear to aim for
  2. Option 1: Decorate a base shoe
  3. Option 2: Make boot covers from a pattern
  4. Spats
  5. Materials, needles and stitching
  6. Anchoring the cover
  7. Glues and adhesives
  8. Safety
  9. Making full shoes from scratch

Victorian footwear to aim for

Victorian footwear included several boot and shoe styles:

  • Button boots, fastened with a buttonhook
  • Lace-up ankle boots
  • Balmoral boots
  • Elastic-sided (Chelsea) boots

Knee-high combat-style boots weren’t everyday Victorian wear, though riding boots were. Aim for one of the styles above, or a plain boot that reads as period-appropriate with a few steampunk details.

Option 1: Decorate a base shoe

Start with a sturdy base shoe. Thrifted lace-up boots, riding boots, or plain pumps and oxfords all work.

  1. Clean and deglaze the surface first. Paint sticks better to a clean, dull finish.
  2. Paint with acrylic leather paint, such as Angelus, in thin layers. Regular acrylic craft paint cracks on flexible leather.
  3. Add metallic accents with Rub ’n Buff wax or metallic paint for a brass or copper look.
  4. Add hardware: buckles, straps, rivets, faux buttons, gears and lacing hooks.
  5. Keep the original sole tread exposed so the shoe still grips.

Option 2: Make boot covers from a pattern

A boot cover is a fitted sleeve that goes over a shoe and the lower leg. You can draft a pattern from your own foot:

  1. Wrap the foot and lower leg in plastic wrap, then cover the wrap with duct tape.
  2. Draw the seam lines on the tape, then cut the shell off.
  3. Flatten the shell and trace it onto paper or card.
  4. Add seam allowance. 5/8 in (1.5 cm) is standard. 3/8 in (1 cm) also works.
  5. Cut the fabric from the traced pattern, then sew the seams.

Suitable materials include faux leather, vinyl, upholstery fabric, suede-look fabric and EVA craft foam for cosplay. Felt is soft and can stretch and pill with wear, so the sturdier materials above are a better starting point.

Spats

Spats (from “spatterdashes”) cover the instep and ankle. They button on the outer side and have a strap that runs under the sole. Spats are a smaller project than full boot covers, and they work with the same base shoes.

Materials, needles and stitching

  • Needles: use a leather or denim needle, size 90/14 to 110/18.
  • Stitch length: use a longer stitch for vinyl or faux leather.
  • Closures: zippers (at the back or side), buttons, lacing, Velcro or buckles.

Anchoring the cover

Anchor the cover with elastic or a strap under the instep or arch. Don’t run it across the whole sole.

Glues and adhesives

  • Contact cement or Barge cement for leather. Use solvent-based glues only with good ventilation.
  • E6000 for gears, buckles and charms.

Safety

  • Use contact cement and other solvent-based glues only in a well-ventilated space.
  • Keep the original sole tread exposed to avoid slipping.
  • Test paint and glue on a hidden spot before you cover a visible area.

Making full shoes from scratch

Making a complete pair of shoes from scratch is a much bigger project than decorating or covering one. Starting with a base shoe gets you a wearable result faster.

For secondhand base shoes and boots, see thrift store steampunk. For how footwear fits into a full outfit, see what to wear to a steampunk party and women’s steampunk outfits.

The complete guide to fashion

Steampunk Fashion: Styles, Clothing and How to Wear It
Read the guide

Keep exploring

Guides from other topics

All topics →